Electrical Panel Components

mrostop

Per page:  

Item #: 753021029
Lightning/Surge Arrester
DIN rail power supply unit 24 V DC/40 A primary switched-mode 3-phase.
quantity

Item #: 753021032
PCB Terminal Block
Preventive function monitoring through professional signaling. Global use due to a wide range input. A high level of operational safety even in complex global networks. Reliable startup of heavy loads due to POWER BOOST
quantity

Item #: 753028900
Sensor/Actuator Box
Jumper Number of positions: 10 Color: blue
  • The 2 to 50 positions
  • Jumpers can bridge up to 50 terminal blocks in the two bridge shafts of the CLIPLINE complete system in one step
quantity

Item #: 753028995
Patch Panel
Plug-in varistor-based lightning arrester for 3-phase TN-S power supply networks with separate N and PE (5-conductor system: L1 L2 L3 N PE) for Lightning Protection Levels III and IV with remote indication contact.
  • Plugs can be checked with CHECKMASTER
  • With or without floating remote indication contact
  • Thermal disconnect device for each individual plug
  • Mechanical coding of all slots
  • Optical, mechanical status indication for the individual arresters
quantity

Item #: 753030046
Surge Protection Device
Multi-level terminal block Cross section: 0.14 mm² - 1.5 mm² AWG: 26 - 16 Connection type: Push-in connection Width: 3.5 mm Color: gray Mounting type: NS 35/7 5 NS 35/15
  • The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors
  • The compact design and front connection enable wiring in a confined space
  • In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection
quantity

Item #: 753031727
Safety Relay
Attachment plug with surge protection for coaxial signal interfaces. Connection: N connector female/female
quantity

Item #: 753031915
Hybrid Motor Starter
Surge arrester consisting of 2-channel base element with remote indication contact and protective plugs connected in series with a varistor and a gas-filled spark gap.
  • For power supplies with higher supply voltages
  • Consistent plug-in design
  • Thermal disconnect device for each individual plug
  • Optical, mechanical status indication for the individual arresters
  • With or without floating remote indication contact
  • Mechanical coding of all slots
quantity