wiring chamber with terminals and 1/2" NPT conduit entry (with indicator light)
Mounting Mode
Mounting on subplate (Porting pattern according to ISO 4401-03-02-0-05 and NFPA T3.5.1 R2-2002 D03; with locating hole and locking pin) 42mm clamping length with 4 x M5 screws or 4 x 10-24 UNC screws
Power Consumption
30W
Current Consumption
1A (nominal hold current)
Control Voltage (DC)
125Vdc
Diagram
circuit diagram C
Protection Class
IP65
Compliant with standard(s)
CE ISO 4401-03-02-0-05 NFPA T3.5.1 R2-2002 D03 CSA
4-way (4/2) directional control hydraulic direct-acting double solenoid valve (21gpm) with concealed manual override - circuit diagram C - Bosch Rexroth (WE series size 6...E / component series 6X (60...69)) - 4WE 6 C6X/OFEG125N9DAL/62=CSA - 125Vdc solenoid (30W) - 350bar / 5076psi - wiring chamber with term. and 1/2" NPT cond. entry (with indic. light) - NBR seals - Mounting on subplate (Porting pattern according to ISO 4401-03-02-0-05 and NFPA T3.5.1 R2-2002 D03; with locating hole and locking pin) - IP65 - 4-ports 2-positions - high-power wet-pin solenoid (with detachable coil) - mech. detent - equivalent to 4WE6C6X/OFEG125N9DAL/62=CSA / 4WE6C6XOFEG125N9DAL62CSA
Directional spool valves, direct operated, with solenoid actuation ? Type WE
Type WE hydraulic directional valves are heavy-duty, solenoid actuated, direct operated spool valves. They control the start, stop, and direction of a flow. These directional valves basically consist of the housing; one or two electronic solenoids, the control spool; and are available with or without return springs or detents. A full array of spools are possible with variations in voltage and electrical connection, all within the program. Flow and pressure rates available to cover a wide range of applications. The duty cycle is 100% with switching frequency capability of 15000/hr for DC and 7200/hr for AC.
Features:
Size 6
Component Series 6X
Max Operating Pressure 350 bar
Max flow 80 l/min - DC and 60 l/min - AC
4/3, 4/2 or 3/2 way versions
Porting pattern according to ISO 4401-03-02-0-05 (with or without locating hole) and NFPA T3.5.1 R2-2002 D03
High-power solenoid, optionally rotatable by 90°
Electrical connection as individual or central connection
Manual Override - optional
Spool position monitoring - optional
CE conformity according to the Low-Voltage Directive 2014/35/EU for electrical voltages >50 VAC or >75 VDC
Solenoid coil as approved component with UR marking according to UL 906, edition 1982 - optional
Approval according to CSA C22.2 No. 139-1982 - optional
